[Sintron] MEGA 2560 Master Kit + Motor Servo LCD Joystick Module for Arduino AVR

Overview
This is a more comprehensive kit than our other starter Kits for Arduino, with this kit, you are able to do more experiment, get your more idea into real action without the restriction of hardware part, and we also provide you pdf files to save your time becoming an expert for this. We believe with this hardware + software support, you are able to become expert programmer ( developer ) very soon, so don't wast time, just get this kit, and start your project right away! 

Compared with UNO R3, this is with main Chip ATmega2560, with more I/O Pins, and additional 10 PWM output, of course, the EEPROM is also with larger space. 

you can also check here for more arduino kits for different level to suit your needs:  Arduino Kits 

This is with very good quality, if customer is not satisfied, we guarantee 100% money back.

For more data, you can check the official website: Arduino IDE

Package list
(1)Arduino-compatible Mega 2560 + USB Cable x1 
(2)Development Expansion Board x1 
(3)Mini Breadboard x1 
(4)830 Point Solderless Breadboard x1 
(5)Stepping Motor Driver Board x1 
(6)Joystick Module x1 
(7)5V Relay Module x1 
(8)1602 LCD Module x1 
(9)RGB Tri-colour LED Module x1 
(10)LEDs x15 
(11)LED Seven-segment Displays (1-digit) x1 
(12)LED Seven-segment Displays (4-digit) x1 
(13)Stepping Motor x1 
(14)Tower Pro Micro Servo 9g (SG90 ) x1 
(15)Active Buzzer x1 
(16)Passive Buzzer x1 
(17)8-bit Shift Register ( 74HC59 ) x1 
(18)Potentiometer x1 
(19)1k Ohm Resistors x5 
(20)10k Ohm Resistors x5 
(21)220 Ohm Resistors x8 
(22)Light Dependant Resistor x3 
(23)Push Bottons x10 
(24)Miniature Push Bottons x4 
(25)Flame Sensor x1 
(26)Infrared Receiver x1 
(27)Tilt Sensors / Switches x2 
(28)LM35 Temperature Sensor x1 
(29)Jumper Wires x30 
(30)40 Pin Header x1 
(31)10 way 20cm Female to Female Dupont Cable x1 
(32)IR Remote Control x1 
(33)Battery Case x1 
(34)Sintron Box x1

For electronic parts, you can also check our store maker-diy.com

Some products show
(1)Arduino-Compatible MEGA 2560 R3
Tech Specifications
1. Microcontroller: ATmega2560 
2. Operating Voltage: 5V 
3. Input Voltage: 7-12V 
4. Input Voltage: 6-20V 
5. Digital I/O Pins: 54 (of which 14 provide PWM output) 
6. Analog Input Pins: 16 
7. DC Current per I/O Pin: 40 mA 
8.DC Current for 3.3V Pin: 50 mA 
9. Flash Memory: 256 KB (ATmega2560) of which 4KB used by bootloader 
10.SRAM: 8 KB (ATmega2560) 
11. EEPROM: 4 KB (ATmega2560) 
12. Clock Speed: 16 MHz

for more informations, you can check here: [Sintron] Arduino MEGA 2560 R3 including USB Cable for 3D Printer
 

(2)2560 Development Expansion Board
Features
Wide prototyping area
Seamlessly plugged into the Arduino MEGA
Arduino pinout
Reset button
Indicator of power and status
Solder components directly
ICSP connector
14 pin SMD footprint (50 mils pitch)
20 pin Through Hole footprint (100 mils pitch)

for more informations, you can check here: Mega2560 1280 Proto Shield V3 Expansion Board With Breadboard For Arduino

(3)830 Point Solderless Bread Board
Brand new and high quality
Model: MB-102
Ever-muse electronic
Ideal for high frequency and low noise circuits
Interconnect any components with 20-29 AWG(0.3-0.8 mm) wire
Special designed spring clip over 5,000 insertion cycles
Nickel plated, silver plated and gold plated available

for more informations, you can check here: Solderless MB-102 MB102 Breadboard 830 Tie Point PCB BreadBoard For Arduino

(4)1602 LCD Modules
Brand new and high quality.
Wide viewing angle and high contrast.
Commonly used in: copiers, fax machines, laser printers, industrial test equipment, networking equipment
such as routers and storage devices.
LCM type: Characters
Can display 2-lines X 16-characters.
Voltage: + 5V DC.

for more informations, you can check here: Backlight Screen With LCD 1602 Display For Arduino Blue Module 1602A 5V
 

(5)SG90 9G Servo
Features
Translucent Body
Light Weight
Less Noise
Connector Wire Length 150mm
Brand new and full packing.
Great for boat, racing car, helicopter and airplane.
Stable and shock proof.
Operating speed: 0.12sec / 60° (4.8V no load).
Stall torque: 1.2 kg / cm (4.8V), 1.6 kg / cm (6.0V).
Operation voltage: 3.5 - 6.0V.
Temperature range: -30°C -- +60°C.
Dead band width: 5usec.
Gear type: nylon gears.
Connector type: Futaba / JR compatible.
 
Specifications
Dimensions: 23 x 12.2 x 29mm
Operating Speed (4.8V no load): 0.1sec / 60 degrees
Stall Torque (4.8V): 1.6kg/cm
Temperature Range: 0 to + 55 degree C
Dead Band Width: 10us
Operation Voltage: 4.8 Volts
Recommend Model: Mini Car / Mini Ship / Helicopter & Airplane
Color: blue
Net weight: 13g
Connector wire length: 250mm

for more informations, you can check here: CFsunbird RC Micro SG90 Servo 9g For Arduino Aeromodelismo Align Trex 450 Airplane Helicopters Accessories

(6)5V Stepper Motor
Rated Voltage: DC 5V 4-phase
Reduction Ratio: 1/64
Step Torque Angle: 5.625/64
DC Resistance: 200±7% (25)
Insulation Resistance: >10M (500V)
Dielectric Strength: 600V AC / 1mA / 1s
Insulation Grade: A
No-load Pull in Frequency: >600Hz
No-load Pull out Frequency: >1000Hz
Pull in Torque: >34.3mN.m(120Hz)
Detent Torque: >34.3mN.
Temperature Rise: <40K(120Hz)
Noise: <40dB (120Hz, No load, 10cm)
Board Size: Approx. 29 ×21 mm

for more informations, you can check here: 1set 5V 4-phase Stepper Motor + Driver Board ULN2003 kit for Arduino
 

(7)ULN2003 Driver Board
ULN2003 is a high voltage and high current Darlington transistor array products with high current gain, high operating voltage, wide temperature range, with a strong load capacity and other characteristics, adapted to the requirements of various types of high-speed high-power drive system. ULN2003 circuit is the United States Texas Instruments and Sprague company developed high-voltage high-current Darlington transistor array circuit, the paper describes its circuit structure, characteristic parameters and typical applications.
 
1. Using ULN2003 high-power Darlington chip-driven stepper motor.
2. Increased output expansion interface.
3. A, B, C, D light-emitting diode instructions four-phase stepper motor work with the state of the standard stepper motor interface, can be used directly plug.