This is specaly used for old arcade game with CGA signal and convert it to VGA signal for LCD etc...
Note: don't use it for industrial device. If yours is industrial device, please use this one instead.
Features
100% Brand New and High Quality.
Sintron HD-Converter Board.
Supports CGA/EGA/VGA/YUV Component Signal Input.
Supports VGA Output (640 x 480, 800 x 600, 1024 x 768, 1360 x 768).
CGA/EGA/VGA signal auto scan (15KHz, 24KHz, 31KHz).
YUV Component signal auto scan (480i, 576i, 720i, 1080i, 480p, 576p, 720p, 1080p).
On Screen Display (English and Chinese).
Supports image position control & image zoom control.
True digital 24-bit A/D converter for true 16.7-million color conversion.
Supports ALL types of VGA monitors (CRT, LCD, PDP, Projector, etc).
Menu control
"MENU" open OSD menu, and enter.
"UP" up and increase.
"DOWN/AUTO" down and reduce.
Press this key: auto scan CGA/EGA signal.
Press this key over 5second and release: reset system
(this operation is invalid when you open OSD menu).
"SW" switch input signal Ypbpr/RGBS/RGBHV
(this operation is invalid when you open OSD menu).
"Clamp sp" & "Clamp" please don't adjust this button, exceptthemonitor hasblack item or picture discoloration.
For more functions control, please look at OSD to operate.
No signal on you monitor.
Please check the input and output cables, make sure all cables are connected. And make sure power is on.
The monitor says "No signal".
Please press "SW" to switch input signal.
Input not supports.
When your monitor displays "input not supports", maybe you need change to low resolution.
Please press "DOWN/AUTO" over 5 second and release. Reset resolution to 800*600.
Image not full onyou screen.
Please entermenu to adjust image position and zoom.
Image shake or freeze.
Please press "DOWN/AUTO", system will auto scan input signal and restore image.
Have black item onscreen, or all screen too black, or picture discoloration.
Please adjust "Clamp sp" and "Clamp st", please keep "Clamp st" less than "Clamp sp".
We suggest "Clamp st" SET "03", "Clamp sp" SET "04".
Image color not right.
Please adjust RGB VR.
Specifications
Input Power: 5VDC +/- 0.5v (2A)
Input signal:
CGA/EGA 14.5kHz - 16.5kHz 23.5kHz - 25.5kHz 30.5kHz - 32.5kHz
RGBHV: 30.5kHz - 32.5kHz
VGA: 30.5kHz - 32.5kHz
Ypbpr: 480p, 576p, 720p,1080p
Ycbcr: 480i, 576i, 720i, 1080i
Output signal:
VGA: 640*480, 800*600, 1024*768, 1360*768
User controls:
Input Switch, Image Zoom, Image Position.
Output Resolution, RGB gain adjust.
Color: Green
Size: 117*100*20 mm
Cable length: 50cm
Package Included
1x Converter board
1x 2P power supply wire
1x 8P signal wire
Below are some real test, you can see the board makes a difference.
