[Sintron] Arduino-Compatible UNO R3 Development Board

Overview
This is an UNO R3 Arduino-compatible board with an Atmega328p and a CH340G serial converter. This board is a clone to the Arduino UNO R3 but functions exactly as an Arduino and is fully compatible with the Arduino Software (IDE).
This UNO has been manufactured using the creative commons files provided on the Arduino website therefore it is not manufactured by Arduino but is compatible in every way and costs much less.
The Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega16U2 (Atmega8U2 up to version R2) programmed as a USB-to-serial converter.

Please make sure you install this driver before you start to use Sintron Pro UNO R3: download driver here: https://goo.gl/vUGoi9
　

Technical Specification
(1) Microcontroller: ATmega328
(2) Operating Voltage: V5
(3) Input Voltage (recommended): 7-12V
(4) Input Voltage (limits): 6-20V
(5) Digital IO Pins: 4 (of which 6 provide PWM output)
(6) Analog Input Pins: 6
(7) DC Current per IO Pin: 40mA
(8) DC Current for 3.3V Pin: 50mA
(9) Flash Memory: 32 KB (ATmega328) of which 0.5 KB used by bootloader
(10) SRAM: 2 KB
(11) EEPROM: 1 KB
(12) Clock Speed: 16 MHz
(13) USB Chip: CH340G
(14) Cable length: 28cm
(15) Weight: 65g

Package included
1 x UNO R3 ATmega328P CH340G Development Board
1 x USB Cable
1 x 40 Pin Header

For electronic parts, you can also check our store maker-diy.com