Sintron ST-004 ST-005 firmware update OTA instruction

Check Your Current Firmware Version

Power on your ST-004 / ST-005. The firmware version is displayed on the LCD screen during startup.

⚠ Before You Continue

not all versions are compatible with each other. please contact us before proceeding.

Download the Firmware

Download the firmware before proceeding.

FILE please contact us to provide to you.

Connect to the Same Network & Find Your Local IP

Ensure your computer and ST-004 / ST-005 are connected to the same Wi-Fi router. Power on the device and note the Local IP shown on the LCD screen.

Example Local IP

192.168.0.102

Your device IP will differ

⚠ Compatibility Warning

Open the Firmware Update Page in Chrome

Open Google Chrome and go to the URL below — replace the example IP with your device's Local IP.

http://192.168.0.102/firmwareupdate replace 192.168.0.102 with your actual Local IP

The upload page looks like this:

Upload the Firmware File

Click "Choose File" and select firmware_version.bin, then click "Update".

Wait until progress reaches 100%. Do not close the browser or cut power during the update.

After reaching 100%, the device may take a few more minutes to complete the update — please be patient and keep the browser open until the device automatically restarts.

Verify the Update Was Successful

Once the upload reaches 100%, the device will automatically restart.

After restarting, check the firmware version on the LCD screen — it should now display the firmware version you updated.

✓ Update Successful

If the LCD screen shows firmware version you updated after restart, the update is complete. No further action is needed.

Firmware Update Guide