Overview
This is a very good kits for starter to study MCU programing.
With This Arduino Uno R3 Starter Kit, you are able to learn and do many experiment such as lighting up the LED, then get the LED to be a output display, and interact with you, also you can learn the basic concepts of buttons, IR remote control with IR receiver.
Use sensors (flame, temperature sensor) to detect the environment, also this includes Servo, Motor, ULN2003 driver board to let you complete Mechanical control over objects, with LCD modules to display your work.
With this kit, you will enjoy a lot of fun and also learn from it. You just need to focus on your Arduino projects, and you can get better soon!
Arduino Uno R3 Pinout Diagram
Some products show
(1)Arduino-Compatible UNO R3 Board
With this product, you are able to use all the Arduino open source platform to create or learn interactive objects, it will be a lot of fun while you are creating and learning it, so just get this and start it, we also provide reference pdf files that can help you to improve skills very quickly. After all, time matters, the sooner you can improve your programing skills, the sooner you can create amazing projects!
Tech Specifications
(1) Microcontroller: ATmega328
(2) Operating Voltage: 5V
(3) Input Voltage (recommended): 7-12V
(4) Input Voltage (limits): 6-20V
(5) Digital I/O Pins: 14 (of which 6 provide PWM output)
(6) Analog Input Pins: 6
(7) DC Current per I/O Pin: 40 mA
(8) DC Current for 3.3V Pin: 50 mA
(9) Flash Memory: 32 KB (ATmega328) of which 0.5 KB used by bootloader
(10) SRAM: 2 KB (ATmega328)
(11) EEPROM: 1 KB (ATmega328)
(12) Clock Speed: 16 MHz
for more informations, you can check here: [Sintron] UNO R3 ATMEGA328P + USB Cable + Reference PDF Files for Arduino's IDE
(2)UNO R3 Development Expansion Board
Duemilanove used in conjunction with ProtoShieldprototype extension boards, used to build the circuit prototypes directly on the board welding components, mini bread plate above can also be connected to the circuit. Sided adhesive connection between the bread board and the board, bread board and the circuit board is sold separate.
The ProtoShield prototype expansion board with two LEDs and two buttons circuit, can be used directly, pin and power have been elicited, very fit and with the build circuit prototype.
for more informations, you can check here: UNO R3 Proto Shield Prototype Expansion Board with SYB-170 Mini Breadboard Based for Arduino Diy Kit
(3)830 Point Solderless Bread Board
Brand new and high quality
Model: MB-102
Ever-muse electronic
Ideal for high frequency and low noise circuits
Interconnect any components with 20-29 AWG(0.3-0.8 mm) wire
Special designed spring clip over 5,000 insertion cycles
Nickel plated, silver plated and gold plated available
for more informations, you can check here: Solderless MB-102 MB102 Breadboard 830 Tie Point PCB BreadBoard For Arduino
(4)1602 LCD Modules
Brand new and high quality.
Wide viewing angle and high contrast.
Commonly used in: copiers, fax machines, laser printers, industrial test equipment, networking equipment
such as routers and storage devices.
LCM type: Characters
Can display 2-lines X 16-characters.
Voltage: + 5V DC.
for more informations, you can check here: Backlight Screen With LCD 1602 Display For Arduino Blue Module 1602A 5V
(5)SG90 9G Servo
Features
Translucent Body
Light Weight
Less Noise
Connector Wire Length 150mm
Brand new and full packing.
Great for boat, racing car, helicopter and airplane.
Stable and shock proof.
Operating speed: 0.12sec / 60° (4.8V no load).
Stall torque: 1.2 kg / cm (4.8V), 1.6 kg / cm (6.0V).
Operation voltage: 3.5 - 6.0V.
Temperature range: -30°C -- +60°C.
Dead band width: 5usec.
Gear type: nylon gears.
Connector type: Futaba / JR compatible.
Specifications
Dimensions: 23 x 12.2 x 29mm
Operating Speed (4.8V no load): 0.1sec / 60 degrees
Stall Torque (4.8V): 1.6kg/cm
Temperature Range: 0 to + 55 degree C
Dead Band Width: 10us
Operation Voltage: 4.8 Volts
Recommend Model: Mini Car / Mini Ship / Helicopter & Airplane
Color: blue
Net weight: 13g
Connector wire length: 250mm
for more informations, you can check here: CFsunbird RC Micro SG90 Servo 9g For Arduino Aeromodelismo Align Trex 450 Airplane Helicopters Accessories
(6)5V Stepper Motor
Rated Voltage: DC 5V 4-phase
Reduction Ratio: 1/64
Step Torque Angle: 5.625/64
DC Resistance: 200±7% (25)
Insulation Resistance: >10M (500V)
Dielectric Strength: 600V AC / 1mA / 1s
Insulation Grade: A
No-load Pull in Frequency: >600Hz
No-load Pull out Frequency: >1000Hz
Pull in Torque: >34.3mN.m(120Hz)
Detent Torque: >34.3mN.
Temperature Rise: <40K(120Hz)
Noise: <40dB (120Hz, No load, 10cm)
Board Size: Approx. 29 ×21 mm
for more informations, you can check here: 1set 5V 4-phase Stepper Motor + Driver Board ULN2003 kit for Arduino
(7)ULN2003 Driver Board
ULN2003 is a high voltage and high current Darlington transistor array products with high current gain, high operating voltage, wide temperature range, with a strong load capacity and other characteristics, adapted to the requirements of various types of high-speed high-power drive system. ULN2003 circuit is the United States Texas Instruments and Sprague company developed high-voltage high-current Darlington transistor array circuit, the paper describes its circuit structure, characteristic parameters and typical applications.
1. Using ULN2003 high-power Darlington chip-driven stepper motor.
2. Increased output expansion interface.
3. A, B, C, D light-emitting diode instructions four-phase stepper motor work with the state of the standard stepper motor interface, can be used directly plug.
for more informations, you can check here: 1set 5V 4-phase Stepper Motor + Driver Board ULN2003 kit for Arduino
(8)Acrylic Case for UNO R3
Features
1. Protective case of UNO R3 (For Arduino UNO R3 Development Board only)
2. Fastened by eight screws and nut.
3. Provides excellent protection, with fashion appearance.
4. Made by high grade acrylic, come with English installation instructions and drawings.
5. Unique design for UNO R3 with pin leakage, which provides easy connection to other components.
for more informations, you can check here: [Sintron] UNO R3 Transparent Gloss Acrylic Case Shell Enclosure Computer Box for Arduino Compatible UNO R3 V3 ATMEGA328P with instructions
Package Contents
(1) Arduino-Compatible UNO R3 Board x 1
(2) UNO Development Expansion Board x 1
(3) Mini Bread Board x 1
(4) 830 Point Solderless Bread Board x 1
(5) SMD Component Box x 1
(6) LED (Red) x 5
(7) LED (Yellow) x 5
(8) LED (Green) x 5
(9) Buzzer x 2
(10) Push Button x 4
(11) LED Seven-Segment Displays (1-digit) x 2
(12) Ball Switches x 2
(13) Light Dependent Resistors ( Light Sensor ) x 3
(14) Potentiometer ( Adjustable Resistor ) x 1
(15) Flame Sensor x 1
(16) Infrared Sensor x 1
(17) 220 Ohm Resistors x 5
(18) 1k Ohm Resistors x 5
(19) 10k Ohm Resistors x 5
(20) LM35 Temperature Sensor x 1
(21) USB Cable x 1
(22) Jumper Cables x 20 (23) 9V Battery Snap + 9V Battery x 1
(24) IR Remote Control x 1
(25) 1602 LCD LCD Modules x 1
(26) SG90 9G Servo x 1
(27) ULN2003 Driver Board x 1
(28) 5V Stepper Motor x 1
(29) CD Tutorial ( 8 Languages ) x1
(30) Acrylic Case for UNO R3 x 1
(31) 40 Pin Header (2.54 mm) x 1
(32) 4 way 20cm Female to Female Dupont Cable x 1
(33) Sintron Color Box x 1
For electronic parts, you can also check our store maker-diy.com