[Sintron] RFID Maste Kit with Motor Servo, LCD, Various Sensors for Arduino IDE AVR MCU Learner

Overview
With this kit, you can use it to communicate with your arduino board. We will provide the connection diagram and the sample code for you to use with this kit, so the process would become very easier for you to get familiar with this kit. So you can start your RFID project as soon as you get this kit, such as use the RFID to open the door etc...and we hope you can also be very creative to use this kit for many awesome ideas! 
 
Unlike other sellers, we are professional and provide all the tools necessary, other seller might just sell you the hardware, then leave you alone, so you have to spend a lot of time to figure out how to get it to work.

you can also check here for more arduino kits for different level to suit your needs: Arduino Kits.
This is with very good quality, if customer is not satisfied, we guarantee 100% money back.

For more data, you can check the official website below:  Arduino IDE.

Connection Image
This picture shows how they connect together with arduino and computer, also how they communicate. We will send a more details connection diagram to you after you purchase it, so you don't need to worry about the connection at all.　

( the connection diagram is only for this kit use, not suitable for others )

Sample Code
This picture shows the sample code, and also how the RFID reader detects the RFID tag and then interact with PC and arduino.

( the connection diagram is only for this kit use, not suitable for others )

RFID-Reader Tech Specifications
(1) Operation Current: 13~26mA / DC3.3V
(2) Idle Current: 10~13mA / DC3.3V
(3) Sleep Current: <80mA
(4) Peak Current: <30mA
(5) Operation Frequency: 13.56MHz Read Range 0~60mm (mifare1)
(6) Interface SPI Data Transition Rate: Up to 10Mbit/s
(7) Supported card types: mifare1 S50, mifare1 S70, mifare UltraLight, mifare Pro, mifare Desfire
(8) Dimension: 40mm~60mm
(9) Operation Temperature: -20-80 degrees Celsius
(10) Storage temperature: -40-85 degrees Celsius
(11) Relative Humidity: 5%~95%
 

UNO-R3 Tech Specifications
(1) Microcontroller: ATmega328 
(2) Operating Voltage: 5V 
(3) Input Voltage (recommended): 7-12V 
(4) Input Voltage (limits): 6-20V 
(5) Digital I/O Pins: 14 (of which 6 provide PWM output) 
(6) Analog Input Pins: 6 
(7) DC Current per I/O Pin: 40 mA 
(8) DC Current for 3.3V Pin: 50 mA 
(9) Flash Memory: 32 KB (ATmega328) of which 0.5 KB used by bootloader 
(10) SRAM: 2 KB (ATmega328) 
(11) EEPROM: 1 KB (ATmega328) 
(12) Clock Speed: 16 MHz 

Package List
 (1)Arduino-compatible UNO R3 x1
 (2)830 Point Solderless Breadboard x1
 (3)Stepping Motor Driver Board x1
 (4)RFID-RC522 Module x1
 (5)RFID Proximity ID Round Tag x1
 (6)RFID Proximity ID Card Tag x1
 (7)RGB Tri-colour LED Module x1
 (8)Joystick Module x1
 (9)5V Relay Module x1
 (10)1602 LCD Module x1
 (11)Microphone Sound Sensor Module x1
 (12)High Sensitivity Water Sensor Module x1
 (13)4x4 Matrix Keyboard Buttons Module x1
 (14)RTC DS1302 Real Time Clock Module x1
 (15)DHT11 Digital Temperature Humidity Sensor Module x1
 (16)LED Seven-segment Displays x2 (1-digit + 4-digit )
 (17)Stepping Motor x1
 (18)Tower Pro Micro Servo 9g x1
 (19)Active Buzzer x1 + Passive Buzzer x1
 (20)8-bit Shift Register ( 74HC59 ) x1
 (21)Potentiometer ( Adjustable Resistor ) x1
 (22)1k Ohm Resistors x5 + 10k Ohm Resistors x5 + 220 Ohm Resistors x8
 (23)Light Sensor x3
 (24)Yellow Push Bottons x4
 (25)LEDs (Green*5,Red*5,Yellow*5)
 (26)Flame Sensor x1
 (27)Infrared Receiver x1
 (28)Tilt Sensors / Switches x2
 (29)LM35 Temperature Sensor x1
 (30)USB Cable x1
 (31)Jumper Wires x30
 (32)10 way 20cm Female to Male Dupont Cable x1
 (33)IR Remote Control x1
 (34)Sintron Box x1

 For electronic parts, you can also check our store maker-diy.com

Some products show
(1)Arduino-Compatible UNO R3 Board
With this product, you are able to use all the Arduino open source platform to create or learn interactive objects, it will be a lot of fun while you are creating and learning it, so just get this and start it, we also provide reference pdf files that can help you to improve skills very quickly. After all, time matters, the sooner you can improve your programing skills, the sooner you can create amazing projects! 

Tech Specifications
(1) Microcontroller: ATmega328 
(2) Operating Voltage: 5V 
(3) Input Voltage (recommended): 7-12V 
(4) Input Voltage (limits): 6-20V 
(5) Digital I/O Pins: 14 (of which 6 provide PWM output) 
(6) Analog Input Pins: 6 
(7) DC Current per I/O Pin: 40 mA 
(8) DC Current for 3.3V Pin: 50 mA 
(9) Flash Memory: 32 KB (ATmega328) of which 0.5 KB used by bootloader 
(10) SRAM: 2 KB (ATmega328) 
(11) EEPROM: 1 KB (ATmega328) 
(12) Clock Speed: 16 MHz 

for more informations, you can check here: [Sintron] UNO R3 ATMEGA328P + USB Cable + Reference PDF Files for Arduino's IDE
 

(2)UNO R3 Development Expansion Board
Duemilanove used in conjunction with ProtoShieldprototype extension boards, used to build the circuit prototypes directly on the board welding components, mini bread plate above can also be connected to the circuit. Sided adhesive connection between the bread board and the board, bread board and the circuit board is sold separate.
 
The ProtoShield prototype expansion board with two LEDs and two buttons circuit, can be used directly, pin and power have been elicited, very fit and with the build circuit prototype.

for more informations, you can check here: UNO R3 Proto Shield Prototype Expansion Board with SYB-170 Mini Breadboard Based for Arduino Diy Kit

(3)830 Point Solderless Bread Board
Brand new and high quality
Model: MB-102
Ever-muse electronic
Ideal for high frequency and low noise circuits
Interconnect any components with 20-29 AWG(0.3-0.8 mm) wire
Special designed spring clip over 5,000 insertion cycles
Nickel plated, silver plated and gold plated available

for more informations, you can check here: Solderless MB-102 MB102 Breadboard 830 Tie Point PCB BreadBoard For Arduino
 

(4)1602 LCD Modules
Brand new and high quality.
Wide viewing angle and high contrast.
Commonly used in: copiers, fax machines, laser printers, industrial test equipment, networking equipment
such as routers and storage devices.
LCM type: Characters
Can display 2-lines X 16-characters.
Voltage: + 5V DC.

for more informations, you can check here: Backlight Screen With LCD 1602 Display For Arduino Blue Module 1602A 5V
 

(5)SG90 9G Servo
Features
Translucent Body
Light Weight
Less Noise
Connector Wire Length 150mm
Brand new and full packing.
Great for boat, racing car, helicopter and airplane.
Stable and shock proof.
Operating speed: 0.12sec / 60° (4.8V no load).
Stall torque: 1.2 kg / cm (4.8V), 1.6 kg / cm (6.0V).
Operation voltage: 3.5 - 6.0V.
Temperature range: -30°C -- +60°C.
Dead band width: 5usec.
Gear type: nylon gears.
Connector type: Futaba / JR compatible.

Specifications
Dimensions: 23 x 12.2 x 29mm
Operating Speed (4.8V no load): 0.1sec / 60 degrees
Stall Torque (4.8V): 1.6kg/cm
Temperature Range: 0 to + 55 degree C
Dead Band Width: 10us
Operation Voltage: 4.8 Volts
Recommend Model: Mini Car / Mini Ship / Helicopter & Airplane
Color: blue
Net weight: 13g
Connector wire length: 250mm

for more informations, you can check here: CFsunbird RC Micro SG90 Servo 9g For Arduino Aeromodelismo Align Trex 450 Airplane Helicopters Accessories

(6)5V Stepper Motor
Rated Voltage: DC 5V 4-phase
Reduction Ratio: 1/64
Step Torque Angle: 5.625/64
DC Resistance: 200±7% (25)
Insulation Resistance: >10M (500V)
Dielectric Strength: 600V AC / 1mA / 1s
Insulation Grade: A
No-load Pull in Frequency: >600Hz
No-load Pull out Frequency: >1000Hz
Pull in Torque: >34.3mN.m(120Hz)
Detent Torque: >34.3mN.
Temperature Rise: <40K(120Hz)
Noise: <40dB (120Hz, No load, 10cm)
Board Size: Approx. 29 ×21 mm

for more informations, you can check here: 1set 5V 4-phase Stepper Motor + Driver Board ULN2003 kit for Arduino
 

(7)ULN2003 Driver Board
ULN2003 is a high voltage and high current Darlington transistor array products with high current gain, high operating voltage, wide temperature range, with a strong load capacity and other characteristics, adapted to the requirements of various types of high-speed high-power drive system. ULN2003 circuit is the United States Texas Instruments and Sprague company developed high-voltage high-current Darlington transistor array circuit, the paper describes its circuit structure, characteristic parameters and typical applications.

1. Using ULN2003 high-power Darlington chip-driven stepper motor.
2. Increased output expansion interface.
3. A, B, C, D light-emitting diode instructions four-phase stepper motor work with the state of the standard stepper motor interface, can be used directly plug.